rotamer library???

[beefdart]

========================[ Sep 20, 2002 2:12 PM ]========================
ERROR: [014.001] {rotlib.c, line 254} Rotamer probabilities sum to less than 1,
randnum=0.076695, k=3, res=T, phi=23.000000, psi=30.000000
FATAL ERROR: [002.013] {randwalk.c, line 3079} A serious error has occured with
rotamer library, bailing..

Is this because its on an older computer (p133) (yes i know I shouldnt fold on it, but it sits in the closet all bored)

thanks

[Brian the Fist]

I seem to recall some early Pentium 1's had a floating point bug - could this be one of them?

[devzero]

It was the pentium 90 that had that problem.
I remember it because a firend of mine hit the problem with his CAD/CAM program.

[MAD-ness]

I thought it was corrected after the first released pentiums, the 90 and the 60 or 66 or whatever. Anyways, I don't *think* it was still an issue by time the 133 was released though I am far from an expert.

[bwkaz]

I used to have a Pentium 133, and the FDIV bug was not in it.

A friend of mine got a P120 around the same time, and same thing -- no FDIV bug.

[Brian the Fist]

alternatively it could just be that your rotlib.bin.bz2 is corrupt and you need to re-copy that file from a 'good' installation. If you get the error again, pay special attention to the res, phi and psi part of the error message and let me know if tehse change or are different each time.

[runestar]

Originally posted by beefdart
========================[ Sep 20, 2002 2:12 PM ]========================
FATAL ERROR: [002.013] {randwalk.c, line 3079} A serious error has occured with
rotamer library, bailing..


Dang, talk about bailing out when the going gets tough...

RS½