em99010pepe
12-21-2008, 07:20 AM
To all,
As you might notice from mersenneforum I changed my modem to a new/fast one (24 Mb D, 1Mb up) but I couldn't run llrnet server on port 443 so I had to change to 6000.
So the new settings for the server are:
serverName = "nplb.dynip.telepac.pt"
port = 6000
I am very sorry for the inconvenience but at the end it's for a good cause.
The work I intend to add to C6000 are k's from this thread:
http://www.mersenneforum.org/showpost.php?p=130575&postcount=1
For the moment we have on the server:
k=341 from n=600k to 1M
k=315 from n=700k to 1M
After the end of Drive 1 I'll be back to k=305 and k=329 up to 1M and run k=315 from 600k to 700k with 4 cores and put 3 cores constantly on C6000. After I complete my manual ranges I'll be 100 % (7 cores) on C6000.
Carlos
As you might notice from mersenneforum I changed my modem to a new/fast one (24 Mb D, 1Mb up) but I couldn't run llrnet server on port 443 so I had to change to 6000.
So the new settings for the server are:
serverName = "nplb.dynip.telepac.pt"
port = 6000
I am very sorry for the inconvenience but at the end it's for a good cause.
The work I intend to add to C6000 are k's from this thread:
http://www.mersenneforum.org/showpost.php?p=130575&postcount=1
For the moment we have on the server:
k=341 from n=600k to 1M
k=315 from n=700k to 1M
After the end of Drive 1 I'll be back to k=305 and k=329 up to 1M and run k=315 from 600k to 700k with 4 cores and put 3 cores constantly on C6000. After I complete my manual ranges I'll be 100 % (7 cores) on C6000.
Carlos