How to control the client

[IronBits]

I see the default behaviour is to download 20 packets, process the 20 packets, then upload/download.

I would like this to be 10 packets, as 20 takes over 4 hours and I'd like the stats to be updated more than that, plus, I have a direct connect, so I should be able to make that 1 packet ;)

We need a good client operation/configuration FAQ ... any takers?

[TheOtherPhil]

To get it to upload after every packet IB, go to Buffer and buffer update options -> Keyserver<->client connectivity options -> Dial up link detection Now select "dial up detection only mode" (yes, I know you have a permanent connection).

You will now have an extra option in the Keyserver<->client connectivity options called Interfaces to watch change this to a "*" to watch all interfaces. Now the buffers will be updated after every completed packet.

I have my client set to download 2 hours worth of wu's (23 packets). I then set the client buffer level check to 30 mins. So although I have 2 hours worth of packets, the buffer gets flushed every 30 mins :).

Hope this helps,
Phil.

[IronBits]

Thanks Phil, that did the trick alright :)

[IronBits]

This is from a Winders box...

[parameters]
id=YourName@YourDomain.DomExt ;) put your real one here

[misc]
project-priority=RC5-72,OGR=0 (no OGR) OR
project-priority=RC5-72,OGR (with OGR) OR
project-priority=OGR,RC5-72=0 (OGR only)

[triggers]
exit-flag-filename=exit.now
pause-on-no-mains-power=no

[display]
progress-indicator=auto-sense

[ogr]
core=-1 (select the fastest core automatically)

[rc5-72]
core=-1 (select the fastest core automatically)
fetch-time-threshold=0
fetch-workunit-threshold=0

[processor-usage]
priority=3

[networking]
autofindkeyserver=no
keyserver=www.dp.cx:2064 (to use DP's pproxy)
nofallback=false (use true if you want to force using DP's pproxy)
dialup-watcher=passive
interfaces-to-watch=*

[buffers]
threshold-check-interval=0:30