not showing in team

[matrix_fan]

I'm not showing up on the Free-Dc team :(, matrix_fan is my username, and i have my team set to Free-DC but i look through all team members and don't see me! I search my username and see it, but i'm not listed on this team :( help?:confused: :confused:

[rshepard]

You should show up tomorrow, after the next update.

[matrix_fan]

ok thanks, i hope i do :( :D :drums: otherwise who knows what could happen...:trash:

[matrix_fan]

That otherwise happened, :(. still not showing up on team :(!!!! So i threw my monitor across the room and broke it, no just kidding :D... anyone have any ides?

[rshepard]

Where are you finding your username listed? I checked at the CB site this morning and couldn't find you listed at all. Are you seeing the client send and receive work?
If all else fails, post your cbspn.conf file and let's see what it looks like.

[matrix_fan]

ok i'll just post it( i use arachinad stats) and searched matrix_fan heres the config:
#
# CBSPN Server
# configuration file
#

# Set UserID (you may use an email address or your name.
# For example:
# uid=Joe Smith
# uid=joe_smith@temple.com
uid=matrix_fan@sbcglobal.net

# Set DC team name
teamname=FREE-DC

# SuperNodes
#supernode0=192.168.1.4
#supernode0=208.179.251.113
supernode0=64.71.165.209

# Proxy Server
#proxyaddr=192.168.1.1
#proxyport=6588

# Text Display mode
# no don't display text
# yes display text output
# Note: first test the client using the yes option.
# when you are sure the client is working correctly, you may switch
# the display setting to no
display=yes

# CPU usage
# above_normal run above normal priority
# below_normal run above idle priority but below normal priority
# normal will run at normal priority
# low will run at idle priority
# Note: Under Microsoft Windows above_normal and below_normal
# are only supported under Windows 2000 and XP. If you are running
# windows and are not using Win2K or XP, make sure to use the low
# or normal priority only.
cpuuse=normal

# Memory usage
# max uses 128 Megs of RAM
# high uses 64 Megs of RAM
# mid uses 32 Megs of RAM
# low uses 16 Megs of RAM
# Warning, on a 128 meg system do not use the max setting!
# You should not use more than half of your available system memory
# if you wish to run other applications while the PeerNode is processing.
memory=max

# Scheduler
# Uses 24 hour clock, 0000 midnight, 2345 fifteen minutes
# to midnight, 0334 3:34 am
#
# * run all the time
# 0100-0200 only run from 1am to 2am per day
# 1800-0600 run off-office hours from 6pm to 6am in the morning
# 2330-0523 run from 11:30pm to 5:23am
# Note: This feature isn't implemented yet. Dont bother using it at this time.
sched=*

# PeerNode Network Monitor Server
# Enter the IP address of the PeerNode Network Monitor Server
# The server uses port 3434, so you may need to open it on your firewall
netmon=127.0.0.1

# Internet Country Code
# Enter the two letter country code if you wish to contribute to our
# world map display. For example if your country is Singapore:
# country=US
# If you do not wish to use this feature make sure that the country=none below.
#
# If you enter an invalid country code, the server will ignore your entry.
#
country=US

[rshepard]

That all looks correct. Are you perhaps running more than one box, and the conf file on it doesn't have the team name filled in? That would wipe out the team designation. If that's not it , then it probably needs to be referred to CJ.

[matrix_fan]

ya i have 2 boxes same config, i think, let me check brb,
ok back on the 2nd machine here is the conf on it:

#
# CBSPN Server
# configuration file
#

# Set UserID (you may use an email address or your name.
# For example:
# uid=Joe Smith
# uid=joe_smith@temple.com
uid=matrix_fan@sbcglobal.net

# Set DC team name
teamname=FREE-DC

# SuperNodes
#supernode0=192.168.1.4
#supernode0=208.179.251.113
supernode0=64.71.165.209

# Proxy Server
#proxyaddr=192.168.1.1
#proxyport=6588

# Text Display mode
# no don't display text
# yes display text output
# Note: first test the client using the yes option.
# when you are sure the client is working correctly, you may switch
# the display setting to no
display=yes

# CPU usage
# above_normal run above normal priority
# below_normal run above idle priority but below normal priority
# normal will run at normal priority
# low will run at idle priority
# Note: Under Microsoft Windows above_normal and below_normal
# are only supported under Windows 2000 and XP. If you are running
# windows and are not using Win2K or XP, make sure to use the low
# or normal priority only.
cpuuse=low

# Memory usage
# max uses 128 Megs of RAM
# high uses 64 Megs of RAM
# mid uses 32 Megs of RAM
# low uses 16 Megs of RAM
# Warning, on a 128 meg system do not use the max setting!
# You should not use more than half of your available system memory
# if you wish to run other applications while the PeerNode is processing.
memory=max

# Scheduler
# Uses 24 hour clock, 0000 midnight, 2345 fifteen minutes
# to midnight, 0334 3:34 am
#
# * run all the time
# 0100-0200 only run from 1am to 2am per day
# 1800-0600 run off-office hours from 6pm to 6am in the morning
# 2330-0523 run from 11:30pm to 5:23am
# Note: This feature isn't implemented yet. Dont bother using it at this time.
sched=*

# PeerNode Network Monitor Server
# Enter the IP address of the PeerNode Network Monitor Server
# The server uses port 3434, so you may need to open it on your firewall
netmon=127.0.0.1

# Internet Country Code
# Enter the two letter country code if you wish to contribute to our
# world map display. For example if your country is Singapore:
# country=US
# If you do not wish to use this feature make sure that the country=none below.
#
# If you enter an invalid country code, the server will ignore your entry.
#
country=US

[Dyyryath]

You do exist:

http://stats.zerothelement.com/cgi-bin/chessbrain/render-user-detailed.pl?Id=aabb4c47

which I know you said you found, but I checked your database entry directly and your team is set to 'none'. Your config looks good to me, you probably need to ask the project admin what's up...

[matrix_fan]

why don't i have a proj. rank?

[the-mk]

Dear Opteron me!

I think I've got a good message for you:

You are showing up in our team at Dyy's stats (http://stats.zerothelement.com/cgi-bin/chessbrain/render-users.pl?team=1)!
(Time 2003-12-20 01:00:00 GMT)


Team Rank Proj Rank Name Last Update Nodes Last Day Nodes Last Week Nodes Total Nodes
59 630 matrix_fan 0.01 0.35 4.50 4.53

Congratulations! :cheers:

Another Question to Dyyryath: is there any reason why the stats didn't update since 2:00 GMT+1? it's nealry 9:00 GMT+1 in Austria now, so stats didn't update for 6 hours... :dunno:

[matrix_fan]

:D Woohooo!!!!!!!!!Finally after 3-4 days, but no worries, as long as i'm on the team now!!! :D, Now if the stats would just update ;)!!!