Results 1 to 15 of 15

Thread: PlayStation 3 Beta

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

  2. #2
    Target Butt IronBits's Avatar
    Join Date
    Dec 2001
    Location
    Morrisville, NC
    Posts
    8,619
    Thanks!

  3. #3
    So is the ps3 client just running the cpu, or is it a really bona-fide SPE etc., client?

  4. #4
    Quote Originally Posted by Brucifer
    So is the ps3 client just running the cpu, or is it a really bona-fide SPE etc., client?
    The PS3 client uses the PPE and SPEs. Comment out of the Readme:
    The PlayStation 3's processor, Cell, was designed by the STI
    (Sony/Toshiba/IBM) joint venture. It is composed of a PowerPC main
    processor (PPE) and up to 8 co-processors, called Synergistic Processing
    Elements or SPEs, all clocked at 3.2 GHz. As shipped in the
    PlayStation 3, Cell has one of its SPEs disabled, so that only 7 SPEs
    are accessible to most games. Moreover, when running an alternative
    operating system such as Linux, the hypervisor reserves one of the SPEs,
    so only 6 SPEs are accessible to applications running under Linux. Note
    that this issue is specific to the PlayStation 3; blade servers using
    Cell processors should have all 8 SPEs available.

    Note that although Linux reports 2 CPUs per Cell, this is due to the PPE
    being a 2-way simultaneous multi-threading (SMT) design, roughly similar
    to the Hyperthreading technology used in Intel's Pentium 4 CPUs. This
    means the operating system sees each CPU as 2 distinct CPUs, but
    physically these CPUs share the majority of execution resources and
    generally cannot perform at twice the rate of a single CPU. Moreover,
    since our cores already exploit all available PPE execution resources in
    a single cruncher, while relying on precise instruction scheduling, it
    has been observed that running multiple PPE crunchers simultaneously on
    the same physical PPE has a negative effect on performance. Therefore
    running multiple PPE crunchers in a single Cell is disabled in this client.
    yoyo

  5. #5
    Thank you yoyo. Is there any performance documentation out there?

  6. #6
    Quote Originally Posted by Brucifer
    Thank you yoyo. Is there any performance documentation out there?
    On PS3 6 SPE + 1 PPE is used, each has 3.2 GHz. They http://www.ps3grid.net/ compared the performance. There is also a Linux version which can be booted from a USB stick.
    On my project yoyo@home PS3 is 3 times faster than a core duo with 3 GHz.
    yoyo

  7. #7
    Target Butt IronBits's Avatar
    Join Date
    Dec 2001
    Location
    Morrisville, NC
    Posts
    8,619

    PS3 Stats - dnetc

    168,318,973 keys/sec = 3,386 blocks per day.
    @ 200 watts, I may have to run out and get another one.

    Wonder how it does on OGR? Anyone...
    I read 230+ Mnodes/s !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •