Page 4 of 5 FirstFirst 12345 LastLast
Results 121 to 160 of 187

Thread: Automated primality testing with LLRnet for CRUS

  1. #121
    Dungeon Master alpha's Avatar
    Join Date
    Mar 2002
    Location
    Norfolk, UK
    Posts
    1,700
    Quote Originally Posted by em99010pepe View Post
    And alpha found one, please check your PM
    Yay! Submitted.

  2. #122
    Carlos, do not count on my production level for the rally this weekend or the days ahead, just find out the company is getting ready to shut down 2 of our 3 offices here in Houston.

    Not sure where that leaves me.
    -:Beyond:-


  3. #123
    Free-DC's Prime Search
    Join Date
    Apr 2004
    Posts
    2,518
    Quote Originally Posted by Beyond View Post
    Carlos, do not count on my production level for the rally this weekend or the days ahead, just find out the company is getting ready to shut down 2 of our 3 offices here in Houston.

    Not sure where that leaves me.
    Don't worry, you already contributed a lot to the project. Meanwhile, could you move what you have to server-port 100 and help me clean the lower ranges?

    Carlos

  4. #124
    Target Butt IronBits's Avatar
    Join Date
    Dec 2001
    Location
    Morrisville, NC
    Posts
    8,619
    Quote Originally Posted by Beyond View Post
    just find out the company is getting ready to shut down 2 of our 3 offices here in Houston.
    Not sure where that leaves me.
    Say it ain't so
    Good luck !!!

  5. #125
    We shutdown 90% of our East Coast operations in the last 6 to 9 months. The hard times have reached Texas now. We shutdown 6 offices across Texas in the last 2 months. So I guess it is our turn in Houston to take a hit.

    I'm not sure if I will be affected. [knocks on wood]

    I currently wear 2 hats the 1st (and most important) is managing our commercial construction division which has not seen a downturn in the market, yet. And 2nd is running the IT department for our Southwest Division.

    Just hedging my bets, hoping for the best and planning for the worst.
    -:Beyond:-


  6. #126
    I have been kindly asked to stop finding primes, it seems the administrator(s) of the project are afraid that we are running out of potential primes. So I will be shutting down operations this evening.


    -:Beyond:-


  7. #127
    Free-DC's Prime Search
    Join Date
    Apr 2004
    Posts
    2,518
    Beyond,

    I'm less than 12 hours to move the rest of my fleet to server port 100. So far I have 3/8 on it. Care to join me for a week? I'll stay there until I dry out the server.

    Carlos

  8. #128
    Quote Originally Posted by em99010pepe View Post
    Beyond,

    I'm less than 12 hours to move the rest of my fleet to server port 100. So far I have 3/8 on it. Care to join me for a week? I'll stay there until I dry out the server.

    Carlos
    I'll join you tomorrow.

    On the job front, I have it on good authority (the owner) that the office closings are not scheduled till next month and I personnaly have no worries, my job is secure.

    The only good thing about this mess, is I will have access to those other 2 offices machines when we move them to our office for storage. I have a "good" place picked out for storage (in my office).
    -:Beyond:-


  9. #129
    Target Butt IronBits's Avatar
    Join Date
    Dec 2001
    Location
    Morrisville, NC
    Posts
    8,619

  10. #130
    Quote Originally Posted by IronBits View Post

    I was sweating bullets for a while .... too old to start over now.
    -:Beyond:-


  11. #131
    Free-DC's Prime Search
    Join Date
    Apr 2004
    Posts
    2,518
    Quote Originally Posted by Beyond View Post
    I'll join you tomorrow.
    I'm already there with 7 cores, more to add.

    Carlos

  12. #132
    I've added 5 of the 8 machines in my office at work. I'll start moving the home machines to port 100 when I get home in a couple of hours.
    -:Beyond:-


  13. #133
    Free-DC's Prime Search
    Join Date
    Apr 2004
    Posts
    2,518
    IronBits, are you going to move the rest of your cores to server port 100?

  14. #134
    Carlos, I think your server has crashed ...... several people are unable to connect.
    -:Beyond:-


  15. #135
    Target Butt IronBits's Avatar
    Join Date
    Dec 2001
    Location
    Morrisville, NC
    Posts
    8,619
    Quote Originally Posted by em99010pepe View Post
    IronBits, are you going to move the rest of your cores to server port 100?
    Yes, shortly. Have to empty the cache first, then switch the port...

  16. #136
    Quote Originally Posted by IronBits View Post
    Yes, shortly. Have to empty the cache first, then switch the port...
    I'd wait to see if the server recovers, port 300 server is still running, but port 100 is down.
    -:Beyond:-


  17. #137
    Target Butt IronBits's Avatar
    Join Date
    Dec 2001
    Location
    Morrisville, NC
    Posts
    8,619
    LLRnet-CRUS current status :
    Sleeping ...
    LLR network client 0.9b7 started
    Based on LLR version 3.5.0
    Loading library 'win32' ...
    winloop thread
    LLRMain started
    server dialog thread started ...

    I guess that's what you mean

  18. #138
    Target Butt IronBits's Avatar
    Join Date
    Dec 2001
    Location
    Morrisville, NC
    Posts
    8,619
    What does this mean?

    LLRnet-CRUS1 current status :
    Initializing ...
    LLR network client 0.9b7 started
    Based on LLR version 3.5.0
    Loading library 'win32' ...
    winloop thread
    LLRMain started
    server dialog thread started ...
    StartServiceCtrlDispatcher returns 0

  19. #139
    Free-DC's Prime Search
    Join Date
    Apr 2004
    Posts
    2,518
    I suggest to move all cores to port 300. I really don't know what's going on on port 100. That's the only server that is down at the moment.

    Sorry.

  20. #140
    Free-DC's Prime Search
    Join Date
    Apr 2004
    Posts
    2,518
    Everything back to normal, don't ask me what happened...

  21. #141
    So are we to use 100 or 300 for the rally?
    -:Beyond:-


  22. #142
    Free-DC's Prime Search
    Join Date
    Apr 2004
    Posts
    2,518
    Quote Originally Posted by Beyond View Post
    So are we to use 100 or 300 for the rally?
    100.
    llrserver has a memory leak so I need often to restart the servers. I forgot to do it last night.

  23. #143
    100 then.
    -:Beyond:-


  24. #144
    Free-DC's Prime Search
    Join Date
    Apr 2004
    Posts
    2,518
    Thank you.
    I'm sorry but the server went down at 2 am here and I went to bed at 1 am ...

  25. #145
    Quote Originally Posted by em99010pepe View Post
    Thank you.
    I'm sorry but the server went down at 2 am here and I went to bed at 1 am ...
    I noticed ..... no problem, I had already pulled 1000+ exponents for my proxy.

    Im noticing a lot of "server refused your new result" error messages
    -:Beyond:-


  26. #146
    Free-DC's Prime Search
    Join Date
    Apr 2004
    Posts
    2,518
    Quote Originally Posted by Beyond View Post
    I noticed ..... no problem, I had already pulled 1000+ exponents for my proxy.

    I'm noticing a lot of "server refused your new result" error messages
    Don't worry, they will be re-assigned but for the last 3 hours I received only one rejected pair on port 300 and 9 on port 100 where 6 were from you. That's normal, it's because I tried to put the server online for several times...

    The client idles connections when it can't connect and tries again to connect every 1 min or so, the server will get all results. So far on more than 500 000 k/n pairs we had two misses.

  27. #147
    Dungeon Master alpha's Avatar
    Join Date
    Mar 2002
    Location
    Norfolk, UK
    Posts
    1,700
    Should port 300 still work? Mine has seized up.

  28. #148
    Free-DC's Prime Search
    Join Date
    Apr 2004
    Posts
    2,518
    Quote Originally Posted by alpha View Post
    Should port 300 still work? Mine has seized up.
    Yep. Your last result was at:
    user=Free-DC_alpha
    [02/23/08 11:06:33]

    It's 12:21 here...what's your cache size?

  29. #149
    Dungeon Master alpha's Avatar
    Join Date
    Mar 2002
    Location
    Norfolk, UK
    Posts
    1,700
    Restarted the client and it is working again now.

    Cache size is just the default of 10. Doesn't really matter because I'm running it alongside dnet. For most of the time I've contributed to this it has only been half a core but I gave it a full core overnight last night.

  30. #150
    Free-DC's Prime Search
    Join Date
    Apr 2004
    Posts
    2,518
    Quote Originally Posted by alpha View Post
    Restarted the client and it is working again now.

    Cache size is just the default of 10. Doesn't really matter because I'm running it alongside dnet. For most of the time I've contributed to this it has only been half a core but I gave it a full core overnight last night.
    Ok. Got 5 results from you.

  31. #151
    Free-DC's Prime Search
    Join Date
    Apr 2004
    Posts
    2,518
    Ironbits,

    Please check all your cores running on server port 100. Last contact before the server went down was from one of your machines. A few years ago RieselSieve had a similar problem and it was a faulty client that jammed the server.

    Thank you.

    Carlos

  32. #152
    Free-DC's Prime Search
    Join Date
    Apr 2004
    Posts
    2,518
    Beyond,

    I'm pulling off my machines from LLRnet and feed them with manual work from the lower ranges. I reserved a range that will put my cores busy for two weeks.

    Carlos

  33. #153
    I have not geared up yet and you are pullng boxes off?
    -:Beyond:-


  34. #154
    Free-DC's Prime Search
    Join Date
    Apr 2004
    Posts
    2,518
    Quote Originally Posted by Beyond View Post
    I have not geared up yet and you are pullng boxes off?
    I'll do the work not with LLRnet client but with LLR standard client.

  35. #155
    Free-DC's Prime Search
    Join Date
    Apr 2004
    Posts
    2,518
    I changed one of the server settings allowing more number of concurrent connections. The server port 100 had 8 and server port 300 had 16, changed both to 30. Let's see what happens.

  36. #156
    I'll attempt to get everything switch over to running off my proxy in the next hour or 2, should reduce the number of clients connecting to your server but it will increase the amount of time I'm connected.

    Proxy is set to cache 1000 test and uploaded every 100 results. I can increase this if needed?
    -:Beyond:-


  37. #157
    Free-DC's Prime Search
    Join Date
    Apr 2004
    Posts
    2,518
    Quote Originally Posted by Beyond View Post
    I'll attempt to get everything switch over to running off my proxy in the next hour or 2, should reduce the number of clients connecting to your server but it will increase the amount of time I'm connected.

    Proxy is set to cache 1000 test and uploaded every 100 results. I can increase this if needed?
    You can keep your proxy server on, just reduce the number of uploaded results to 50 at time (proxyTosendThreshold = 50).

  38. #158
    Target Butt IronBits's Avatar
    Join Date
    Dec 2001
    Location
    Morrisville, NC
    Posts
    8,619
    My clients upload each wu as it completes.
    Is there a setting I can change so that it caches 10 wus, finishes 8 and starts looking for the server to upload?
    Also, is there a windows or OSX version of the llrnet server software I can use that might help out?

  39. #159
    Free-DC's Prime Search
    Join Date
    Apr 2004
    Posts
    2,518
    Quote Originally Posted by IronBits View Post
    My clients upload each wu as it completes.
    Is there a setting I can change so that it caches 10 wus, finishes 8 and starts looking for the server to upload?
    I think this is the setting:

    -- number of time to retry to send results before going for next WU.
    -- set it to 0 for no retries, for user with no permanent connection
    -- this is the suggested setting as it will save them precious
    -- minutes of useless retries (the program sleep for one minute
    -- between two retries)
    sendRetries = 0

    Quote Originally Posted by IronBits View Post
    Also, is there a windows or OSX version of the llrnet server software I can use that might help out?

    Give me more 2-3 hours to see if the servers are ok, meanwhile you can start to download this:

    http://stats.rieselsieve.com/downloa...et-windows.zip
    http://stats.rieselsieve.com/download/llrnet.linux.tgz

    And start changing a few settings on llr-serverconfig.txt file, see bold text.

    --
    -- LLRNet - network part of LLR
    --
    -- (C) 2004-2005 Vincent Penne
    --
    -- Released under GNU LIBRARY GENERAL PUBLIC LICENSE
    -- (See file LICENSE that must be included with this software)
    --
    -- SERVER CONFIGURATION FILE
    --
    -- WARNING: comments start with two dashes
    --

    -------------------
    -- general settings
    -------------------

    -- server name
    -- used in particular to identify the server into the sql stats table
    -- (change this name if you have several servers using the same sql database)
    serverName = "CRUS.dynip.telepac.pt"

    -- port that the server listen to (make sure clients are configured
    -- with the same number)
    port = 100

    -- maximum number of concurrent connections
    maxConnections = 30

    -- maximum allowed time for a user to complete a job (in seconds)
    jobMaxTime = 4 * 24 * 3600 -- 4 days

    -- various files used by the server
    knPairsFile = "knpairs.txt"
    jobListFile = "joblist.txt"
    resultsFile = "results.txt"

    -- if you want the server to regularly prune your knpairs and joblist
    -- files, then uncomment the following line and set the period of
    -- pruning in second.
    prunePeriod = 0.5 * 24 * 3600 -- 1/2 days

    -- (for gurus only)
    if WIN32 then
    no_shell = 1
    end

    -- format used to display numbers in result file
    -- (uncomment the appropriate line)
    --displayFormat = "%s*2^%s+1" -- use this for PRP type test
    displayFormat = "%s*2^%s-1" -- use this for LLR type test (default)

    -- uncomment the following line to remove username check when
    -- accepting a new result
    noUserCheck = 1

    -- you can customize the way the date is displayed
    -- (in joblist.txt and results.txt)
    --function DisplayDate()
    -- return date("%d/%m/%Y\ %r")
    --end

    -----------------
    -- PROXY settings
    -----------------
    -- uncomment the following line to make this server a proxy server
    --proxy = 1

    -- address of the parent server
    proxyMasterAddress = "localhost"
    proxyMasterPort = 7000

    -- name of this proxy (change 'nobody' to something else)
    proxyName = "nobody"

    -- size of the proxy cache
    proxyCacheSize = 10

    -- minimum number of results to send back to the main server
    -- at a time
    proxyTosendThreshold = 10

    -- name of the tosend file of the proxy
    tosendFile = "tosend-proxy.txt"


    -----------------
    -- User CALLBACKS
    -----------------

    -- below is an example of callback to log all primes as they are
    -- found into an additional file

    --function OnPrime(t, k, n, job)
    -- local fileprime = openfile("primes.txt", "a")
    -- if fileprime then
    -- write(fileprime, format("[%s]\n", job.resultdate))
    -- write(fileprime, format(displayFormat.." is prime! Time : %d.0 sec.\n",
    -- k, n,
    -- Seconds() - job.seconds))
    -- closefile(fileprime)
    -- end
    --end


    -- similarly, you can have another callback called OnResult,
    -- beware that it takes one additional argument (the residue)

    --function OnResult(t, k, n, residue, job)
    -- insert whatever you want here
    --end


    ------------------------------------------
    -- SQL settings (mySql only at the moment)
    ------------------------------------------

    -- uncomment the line below to use SQL
    --sqlUsed = 1

    -- sql general configuration
    sqlServer = "localhost"
    --sqlServerPort = 4000
    sqlDriver = "mysql"
    sqlUser = "llrnet"
    sqlPassword = "llrnet"
    sqlDbName = "llrnet"

    -----------------
    -- SQL user table
    -----------------
    -- uncomment the line below and set the name of the table of users
    --sqlUsersTable = "users"

    -- name of the fields containing the username and the password
    sqlUsernameEntry= "username"
    sqlPasswordEntry= "password"


    ------------------------
    -- SQL pairs and results
    ------------------------
    -- uncomment the line below and set the name of the tables
    --sqlPairsTable = "pairs"
    sqlJobsTable = "jobs"
    sqlResultsTable = "results"
    sqlRejectedTable= "rejected"


    ------------
    -- SQL stats
    ------------
    -- uncomment the line below to allow llrnet server statistics and infos
    -- to be regularly updated into the given sql table
    --sqlStatsTable = "stats"


    --------------------------
    -- WIN32 specific settings
    --------------------------
    -- uncomment the line below to hide the tray icon on startup
    --hideTrayIcon = 1

    -- change this value if you want to run several client as services
    serviceName = "NPLB_LLRserver"

    -- under WIN32 platform, uncomment the following line to log stdout and stderr
    -- to a file called "stdout.txt"
    --logOutput = 1


    -- MY TEST
    --port = 7001
    --proxy = 1
    --knPairsFile = "knpairs-proxy.txt"
    --jobListFile = "joblist-proxy.txt"
    --proxyCacheSize = 10
    --proxyName = "proxy1"

    --sqlUsed = 1
    --sqlUsersTable = "users"

  40. #160
    Quote Originally Posted by em99010pepe View Post
    I think this is the setting:
    That's wrong .... that is the setup for the main server.


    IB, this all you really need to change


    -------------------
    -- general settings
    -------------------

    -- server name
    -- used in particular to identify the server into the sql stats table
    -- (change this name if you have several servers using the same sql database)
    serverName = "Free-DC_Beyond"

    -- port that the server listen to (make sure clients are configured
    -- with the same number)
    port = 7000

    -- maximum number of concurrent connections
    maxConnections = 8

    -- maximum allowed time for a user to complete a job (in seconds)
    jobMaxTime = 4 * 24 * 3600 -- 14 days

    -- various files used by the server
    knPairsFile = "knpairs.txt"
    jobListFile = "joblist.txt"
    resultsFile = "results.txt"

    -- if you want the server to regularly prune your knpairs and joblist
    -- files, then uncomment the following line and set the period of
    -- pruning in second.
    prunePeriod = 1 * 24 * 3600 -- every days

    -- (for gurus only)
    if WIN32 then
    no_shell = 1
    end

    -- format used to display numbers in result file
    -- (uncomment the appropriate line)
    --displayFormat = "%s*2^%s+1" -- use this for PRP type test
    --displayFormat = "%s*2^%s-1" -- use this for LLR type test (default)

    -- uncomment the following line to remove username check when
    -- accepting a new result
    noUserCheck = 1

    -- you can customize the way the date is displayed
    -- (in joblist.txt and results.txt)
    --function DisplayDate()
    -- return date("%d/%m/%Y\ %r")
    --end

    -----------------
    -- PROXY settings
    -----------------
    -- uncomment the following line to make this server a proxy server
    proxy = 1

    -- address of the parent server
    proxyMasterAddress = "CRUS.dynip.telepac.pt"
    proxyMasterPort = 100


    -- name of this proxy (change 'nobody' to something else)
    proxyName = "Free-DC_Beyond"

    -- size of the proxy cache
    proxyCacheSize = 2000

    -- minimum number of results to send back to the main server
    -- at a time
    proxyTosendThreshold = 50

    -- name of the tosend file of the proxy
    tosendFile = "tosend-proxy.txt"
    -:Beyond:-


Page 4 of 5 FirstFirst 12345 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •