Results 1 to 18 of 18

Thread: Static IP's

  1. #1
    =>Team Joker<= LAURENU2's Avatar
    Join Date
    Dec 2004
    Location
    Chicago IL USA
    Posts
    5,478
    Blog Entries
    1

    Question Static IP's

    I was thinking of changing to a business class INTERNET 22Mb down 5Mb up
    And it can have up to 5 static IP's
    I am not sure how to configure them Do I need 5 router to do it ?
    Or can it be done though 1 router like a RVS4000

  2. #2
    =>Team Joker<= LAURENU2's Avatar
    Join Date
    Dec 2004
    Location
    Chicago IL USA
    Posts
    5,478
    Blog Entries
    1
    Help Please

  3. #3
    BOINC Gypsy ChertseyAl's Avatar
    Join Date
    Aug 2008
    Location
    London, Englandshire
    Posts
    209
    I'm not a network expert, but I assume you'll need a non-NAT router.

    Obvious question, but are you going to use the static IPs? As you say 'up to 5' I'd guess you can just use one with a standard NAT router.

    You could ask in the forums over at http://www.whatismyip.com/ as there are a couple of guys there that know their stuff

    Oh, is this cable? Which network? Have you checked their support forums/newsgroups?

    Al.

  4. #4
    Administrator Bok's Avatar
    Join Date
    Oct 2003
    Location
    Wake Forest, North Carolina, United States
    Posts
    24,596
    Blog Entries
    13
    Lauren,

    unless you want to set up completely separate networks or you want to have more than one outside facing machine it's just not really worth the extra trouble of configuring a modem to handle more than one ip address.

    Bok

  5. #5
    BOINC Gypsy ChertseyAl's Avatar
    Join Date
    Aug 2008
    Location
    London, Englandshire
    Posts
    209
    OK, I did a bit more research. Looks like the awesome Linksys WRT54G might do the job (I use one myself, running DD-WRT SE). A friend who knows this stuff thinks that the Tomato firmware will do what you need. But I think DD-WRT will do it also. Both of those are free, open source firmwares. However, you do need to be a few steps above 'newbie' to easily upgrade the firmware (sorry if I've unintentionally insulted you!).

    Actually, this link looks like it might give you some ideas:

    http://www.techsupportforum.com/netw...le-router.html

    In case that wraps around, here's a short version:

    http://bit.ly/aYsD2J

    HTH, and like I said, I'm not an expert on this stuff

    Cheers,

    Al.

  6. #6
    BOINC Gypsy ChertseyAl's Avatar
    Join Date
    Aug 2008
    Location
    London, Englandshire
    Posts
    209
    Quote Originally Posted by Bok View Post
    it's just not really worth the extra trouble of configuring a modem to handle more than one ip address
    Agree. If bandwidth saturation is the problem another option might be multiple modems and channel bonding within the router.

    OT: I find it quite surprising that the (i.e. our only) UK cable company now offer 50MB and are now rolling out 100MB and the USA seems to be lagging :/

    Al.

  7. #7
    Administrator Bok's Avatar
    Join Date
    Oct 2003
    Location
    Wake Forest, North Carolina, United States
    Posts
    24,596
    Blog Entries
    13
    Slightly larger country to cover with fibre

  8. #8
    BOINC Gypsy ChertseyAl's Avatar
    Join Date
    Aug 2008
    Location
    London, Englandshire
    Posts
    209
    Quote Originally Posted by Bok View Post
    Slightly larger country to cover with fibre
    Hehe

    Cable coverage in the UK is actually terrible. The technology is great. And the marketing is awful

    These days in the UK internet access is just sold as an add-on to TV services. Content is king as they say, and our only cable supplier doesn't have it. ADSL is laughable. Lucky to get 2MB on a good day. The new game is "Quad Play" - i.e. sucker the punter into buying TV, phone, net, mobile from one supplier. As stupid as it sounds, people fall for it

    Al.

  9. #9
    =>Team Joker<= LAURENU2's Avatar
    Join Date
    Dec 2004
    Location
    Chicago IL USA
    Posts
    5,478
    Blog Entries
    1
    OK sorry for not getting back sooner Busy Day
    The Reason
    #1 I run 2 DSL lines 716/3mb each
    1 for my Garage Pharm and 1 for my house
    I need more up stream to to deliver all the WU's I crunch
    And I wanted to stream Movies off netflix
    Hard to do with 3or Les Mb without a webtv box.
    #2 I have a friend who wants to start a
    Website for his restaurant, thought I could host it for him
    And I guess with all the Power I have I could be a Host provider
    Boost it to 10/50mb and take it for a write off
    But you Know me I'm a little dumb in this kind of thing
    I guess I will have to hire Bok or gopher to be my web master
    But I did think 1 static IP would be good so I could look in from the Moon if I wanted to

  10. #10
    Old Fart Bigred's Avatar
    Join Date
    Oct 2009
    Location
    Wiesbaden
    Posts
    728
    I understand about the transfer backlog. I have the same problem at work. I have to be choosy about what I crunch or it really backs up.































    BTW.
    Happy Birthday Lauren.
    19 primes found. The largest: 1351*2^617684+1 (185945 digits)

  11. #11
    =>Team Joker<= LAURENU2's Avatar
    Join Date
    Dec 2004
    Location
    Chicago IL USA
    Posts
    5,478
    Blog Entries
    1
    haha Thanks Bigred
    But with 5mb up I should not have a backup

    Quote Originally Posted by Bok View Post
    Lauren,

    unless you want to set up completely separate networks or you want to have more than one outside facing machine it's just not really worth the extra trouble of configuring a modem to handle more than one ip address.

    Bok
    I guess your right Bok I will just let my friend fend for himself
    And only get 1 static IP

  12. #12
    Administrator Bok's Avatar
    Join Date
    Oct 2003
    Location
    Wake Forest, North Carolina, United States
    Posts
    24,596
    Blog Entries
    13
    Not necessarily, you can have MANY domains pointing to a single ip address, that's simple enough. I'm doing that here. In your case it would be the only website yes? All you would need to do is configure your firewall to route all traffic on port 80/443 to your webserver.

  13. #13
    =>Team Joker<= LAURENU2's Avatar
    Join Date
    Dec 2004
    Location
    Chicago IL USA
    Posts
    5,478
    Blog Entries
    1
    Well I got the business class INTERNET 22Mb down 5Mb up installed and running
    It clocks in better then promised I get 24 Mb D/L and 7Mb U/L
    And it has a Fast 10Ms ping at 50 Miles
    The old DSL pinged at 42 MS at 50 Miles
    So I'm ready to conquer the world now

  14. #14
    Administrator Bok's Avatar
    Join Date
    Oct 2003
    Location
    Wake Forest, North Carolina, United States
    Posts
    24,596
    Blog Entries
    13
    sweet!

  15. #15
    =>Team Joker<= LAURENU2's Avatar
    Join Date
    Dec 2004
    Location
    Chicago IL USA
    Posts
    5,478
    Blog Entries
    1
    Can VNC work on a Mac

  16. #16
    Administrator Bok's Avatar
    Join Date
    Oct 2003
    Location
    Wake Forest, North Carolina, United States
    Posts
    24,596
    Blog Entries
    13
    Not that I've tried, but a quick search indicates that RealVNC is available for MacOS yes.

  17. #17
    =>Team Joker<= LAURENU2's Avatar
    Join Date
    Dec 2004
    Location
    Chicago IL USA
    Posts
    5,478
    Blog Entries
    1
    Boy you even have to remap your mac keyboard to work with MS OS
    mac seems like a Royal pain in The ass

  18. #18
    Free-DC Semi-retire gopher_yarrowzoo's Avatar
    Join Date
    Mar 2002
    Location
    Knoxville, TN
    Posts
    3,985
    Yes that is because the mac keyboard has a different layout and there are different keys to do the same job on a mac as on a PC like the windows key is the apple key and ctrl is the Flowery symbol key I think and a few others act different and does it still have only 1 mouse button :P
    Semi-retired from Free-DC...
    I have some time to help.....
    I need a new laptop,but who needs a laptop when you have a phone...
    Now to remember my old computer specs..


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •