PDA

View Full Version : FS: P2 350Mhz system, web server



FoBoT
10-12-2002, 07:58 PM
Web server running Clarkconnect Linux -> ClarkConnect (http://www.clarkconnect.org)

check the homepage here -> Your new web server (http://fobot.pointclark.net:8080)
check the admin page here -> WebAdmin (https://fobot.pointclark.net:3000)

you can see examples of the gallery and mp3 script on my own clarkconnect box
photo gallery -> FoBoT's Cool Internet Picture Gallery (http://fobot.pointclark.net/gallery)
andromeda -> andromeda (http://fobot.pointclark.net/andromeda/andromeda.php)

Aopen AX6B Plus motherboard with onboard UW scsi controller
128MB PC133 SDRAM
Pentium II 350 Mhz Slot 1 CPU w/passive heat sink
pair of Seagate ST32550W Barracuda 2LP hard drives, 2.15 GB 7200 rpm, one shows as a Compaq in BIOS
partitioning set as follows:
drive 1 is the OS, and Windows share and swap file
drive 2 is mounted /var, ftp and web page shares the 2GB
Delta 50X IDE CDROM drive, missing face plate, loud(when in use), used to boot/load OS
PCI 3Com 3C900-TPO network card 10BT
ISA Trident VGA video 512K memory (this version of Linux is console/text only, no GUI)

ATX mid tower case with 250W power supply, 5.25" cage modded/chopped to fit the motherboard(this mobo is larger than most modern ATX boards), one case fan mounted (with tie wraps) on the front, under the hard drives to blow hot air out
the plastic front of the case is broken off/lost, the power on/off button hangs out the front

Pictures (http://fobot.pointclark.net/gallery/p2350)

motherboard only has one working PCI and one working ISA slot, so if you want to load a different linux distro, you either have to go text/console only (using the ISA video), or I will switch the ISA video/PCI NIC for a PCI video and ISA NIC if you want to be able to run X-windows
i have had this motherboard running various servers for me for almost two years since i bought it, it is solid/works great despite the problems with the slots

no keyboard/mouse, install CDROM included

$99 + actual cost of shipping of your choice (UPS is easiest for me so I will pay $5 of the shipping if you select UPS)


-----------
partitioning of the hard drives is:

/dev/sda
/dev/sda1 31M /boot
/dev/sda2 1482M /
/dev/sda3 258M swap
/dev/sda4 274M Extended
/dev/sda5 203M /tmp
/dev/sda6 70M /dev/shm
/dev/sdb
/dev/sdb1 2000M /var

all partitions ext3