Linux Networking

[Fozzie]

OK I have given up trying to get this piece of poop winmodem working under Mandrake 9.1.

So I have a few gen sitting on a laptop with no way to get up to the server.

So i thought lets just network it and all will be fine.

Whilst i can network every Microshaft OS under the sun I can't figure out how to do it under Linux.

Any of you guys fancy giving a noobie orientated masterclass on how to get files from one to another.

[the-mk]

- Do you have a network-connection to your win-machines? (can you ping it etc)
- Do you have any server installed and running? (ie apache or samba)

EDIT: I don't know if you can upload linux-results with a windows-client...

[Fozzie]

Linux to Linux.

I have the CDs just tell me what I need to install and where and I'll get em conected.

I have a 4 port hub and CAT5 to each machine.

Both are Mandrake 9.1

[the-mk]

For a read only connection from the machine offering the client-work you could
- install apache
- tar and gzip the distributedfolding-directory
- download it on the machine with the internetconnection
- ungzip and untar it
- upload the data.

:whip: BUT: I'm a little linux-newbe too, so I can't really tell you how to install a apache-server or something other after a successfull mandrake install... but I'm sure Mandrake has some tools to install that software somehow... (something like mandrake controll center system configuration tool, I've got a german version installed...)

But if you have questions, ask! Maybe I can answer them...

And there could be better possibilities to move data from one machine to another (NFS, SMB) but I'm not so deep involved into linux :(

[Kosh]

As far as I know Mandrake installs OpenSSH by default. To move my stuff around I do this:



scp <local file to copy> <user>@<other machine's name or ip address>:<path to copy to>


it will ask for your password of the user id on the remote computer and copy it there. Just to make sure everything is clear an example:



scp df.tbz2 monkey@remote:/home/primate


Oh yeah, and if you don't want to mess with tar and gzip or bzip2 then you can use the -r switch with scp to recursively copy the directory:



scp -r /usr/local/distribfold monkey@remote:/home/primate


and the whole directory will be copied into /home/primate/distribfold

[the-mk]

Hey! That works great! :thumbs: :notworthy KOSH :notworthy :D

Works better and easier than my idea!

I've got a lot to learn on linux :|punch|:

[Fozzie]

all I get is connection refused.

I can't even ping the other machine.

So if anyone has got the time could I have a from the ground up how to get 2 machines to copy files between each other.

How do set the computer names?
How do I establish a workgroup or suchlike?
Are there firewalls I need to turn off or ports to open?
I have installed the SSH client on both PCs?
Do I need one acting as the server?
Do I need to set up DHCP etc?
Dos a simple peer to peer exist?

Help :)

[rsbriggs]

Lets start by doing "ifconfig" on both machines to see if their network connections are functional.
You would normally see "lo" and "eth0" entries. If you have eth0 entries, you should see a valid IP address. Note that this machine is 192.168.0.69, and the interface is "UP"



eth0 Link encap:Ethernet HWaddr 00:04:4B:80:80:03
inet addr:192.168.0.69 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::204:4bff:fe80:8003/10 Scope:Link
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9345 errors:0 dropped:0 overruns:0 frame:0
TX packets:5595 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:11907859 (11.3 Mb) TX bytes:441460 (431.1 Kb)
Interrupt:11 Base address:0x1000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:600 (600.0 b) TX bytes:600 (600.0 b)

[Fozzie]

Woohoo the Laptop has now decided to find the desktop, after a good old reboot.

The ifconfigs came up fine so though I'd try the SSH transfer again and it all went through great.

Now uploading 294 gens of hard earned Linux work :)