ya i have 2 boxes same config, i think, let me check brb,
ok back on the 2nd machine here is the conf on it:
#
# CBSPN Server
# configuration file
#
# Set UserID (you may use an email address or your name.
# For example:
# uid=Joe Smith
#
[email protected]
[email protected]
# Set DC team name
teamname=FREE-DC
# SuperNodes
#supernode0=192.168.1.4
#supernode0=208.179.251.113
supernode0=64.71.165.209
# Proxy Server
#proxyaddr=192.168.1.1
#proxyport=6588
# Text Display mode
# no don't display text
# yes display text output
# Note: first test the client using the yes option.
# when you are sure the client is working correctly, you may switch
# the display setting to no
display=yes
# CPU usage
# above_normal run above normal priority
# below_normal run above idle priority but below normal priority
# normal will run at normal priority
# low will run at idle priority
# Note: Under Microsoft Windows above_normal and below_normal
# are only supported under Windows 2000 and XP. If you are running
# windows and are not using Win2K or XP, make sure to use the low
# or normal priority only.
cpuuse=low
# Memory usage
# max uses 128 Megs of RAM
# high uses 64 Megs of RAM
# mid uses 32 Megs of RAM
# low uses 16 Megs of RAM
# Warning, on a 128 meg system do not use the max setting!
# You should not use more than half of your available system memory
# if you wish to run other applications while the PeerNode is processing.
memory=max
# Scheduler
# Uses 24 hour clock, 0000 midnight, 2345 fifteen minutes
# to midnight, 0334 3:34 am
#
# * run all the time
# 0100-0200 only run from 1am to 2am per day
# 1800-0600 run off-office hours from 6pm to 6am in the morning
# 2330-0523 run from 11:30pm to 5:23am
# Note: This feature isn't implemented yet. Dont bother using it at this time.
sched=*
# PeerNode Network Monitor Server
# Enter the IP address of the PeerNode Network Monitor Server
# The server uses port 3434, so you may need to open it on your firewall
netmon=127.0.0.1
# Internet Country Code
# Enter the two letter country code if you wish to contribute to our
# world map display. For example if your country is Singapore:
# country=US
# If you do not wish to use this feature make sure that the country=none below.
#
# If you enter an invalid country code, the server will ignore your entry.
#
country=US