Results 1 to 7 of 7

Thread: Win32 exception with latest WinGUI

  1. #1

    Win32 exception with latest WinGUI

    After allowing the screensaver running for a while, A win32 Excpetion occurs and is followed by

    FOLDTRAJ caused an invalid page fault in
    module FOLDTRAJ.SCR at 0167:0044fdb6.
    Registers:
    EAX=00000000 CS=0167 EIP=0044fdb6 EFLGS=00010246
    EBX=012af234 SS=016f ESP=012af1dc EBP=0117fec8
    ECX=00000000 DS=016f ESI=01086a5e FS=19df
    EDX=04ba96d0 ES=016f EDI=0040c110 GS=41c6
    Bytes at CS:EIP:
    8a 41 04 48 0f 84 c9 00 00 00 48 74 56 83 e8 02
    Stack dump:
    0040c110 01086a5e 0117fec8 012af234 0117fec8 0040b15f 04ba96d0 00000001 00000000 0117fec8 0040ad70 012af20c 00000000 01180b66 00000000 00000000


    This appears to be near sometime near the completion of a data set.


    ------------------
    System Information
    ------------------
    Time of this report: 6/2/2002, 16:17:41
    Operating System: Microsoft Windows 98 (4.10, Build 2222) A
    Language: English (Regional Setting: English)
    System Manufacturer:
    System Model:
    BIOS:
    Processor: AMD Athlon(tm) Processor, MMX, 3DNow, ~600MHz
    Memory: 256MB RAM
    Page File: 59MB used, 1733MB available
    Primary File System: n/a
    DirectX Version: DirectX 8.1 (4.08.01.0881)
    DX Setup Parameters: /PackageInstall
    DxDiag Version: 4.08.01.0881 32bit

    ------------
    DxDiag Notes
    ------------
    DirectX Files Tab: No problems found.
    Display Tab 1: The file nvdisp.drv is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs. You may be able to get a signed driver from the manufacturer of the hardware device.
    Sound Tab 1: The file EMU10K1.VXD is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs. You may be able to get a signed driver from the manufacturer of the hardware device.
    Music Tab: No problems found.
    Input Tab: No input devices detected.
    No problems found.
    Network Tab: No problems found.

    ---------------
    Display Devices
    ---------------
    Card name: ASUS AGP-V7700 Pure/Deluxe v29.41
    Manufacturer: ASUS
    Chip type:
    DAC type:
    Device ID: Enum\PCI\VEN_10DE&DEV_0150&SUBSYS_40161043&REV_A3\280800
    Display Memory: 31.5 MB
    Current Mode: 1600 x 1200 (16 bit)(optimal refresh rate)
    Monitor: Sylvania F93
    Monitor Max Res: 1600,1200
    Driver Name: nvdisp.drv
    Driver Version: 4.13.01.2941 (English)
    DDI Version: 8 (or higher)
    Driver Attributes: Final Retail
    Driver Date/Size: 5/3/2002 19:37:32, 13824 bytes
    Driver Signed: No
    WHQL Date Stamp: None
    VDD: *vdd
    Mini VDD: nvmini.vxd
    Mini VDD Date: , 0 bytes
    Device Identifier: {D7B71E3E-4210-11CF-8E78-176001C2C935}
    Vendor ID: 0x10DE
    Device ID: 0x0150
    SubSys ID: 0x40161043
    Revision ID: 0x00A3
    Registry: OK
    DDraw Status: Enabled
    D3D Status: Enabled
    AGP Status: Enabled
    DDraw Test Result:
    D3D7 Test Result:
    D3D8 Test Result:

    -------------
    Sound Devices
    -------------
    Description: DirectSound (SB Live! Wave Out [B400])
    Device ID: PCI\VEN_1102&DEV_0002&SUBSYS_00211102&REV_03\BUS_00&DEV_10&FUNC_00
    Manufacturer ID: 2
    Product ID: 104
    Type: VXD
    Driver Name: EMU10K1.VXD
    Driver Version: 4.11.01.0711 (English)
    Driver Attributes: Final Retail
    Driver Signed: No
    Date and Size: 4/3/2000 01:07:00, 265293 bytes
    Other Files: emu10k1.vxd
    Driver Provider: Creative
    HW Accel Level: Full
    Registry: OK
    Sound Test Result:

    -----------
    DirectMusic
    -----------
    DLS Path: C:\WINDOWS\system32\drivers\gm.dls
    Version: 1.00.16.0002
    Ports:
    Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
    MIDI Mapper, Hardware (Not Kernel Mode), Output, No DLS, Internal
    Creative S/W Synth, Hardware (Not Kernel Mode), Output, No DLS, Internal
    A: SB Live! MIDI Synth, Hardware (Not Kernel Mode), Output, No DLS, Internal
    B: SB Live! MIDI Synth, Hardware (Not Kernel Mode), Output, No DLS, Internal
    SB Live! MIDI Out [B400], Hardware (Not Kernel Mode), Output, No DLS, External
    SB Live! MIDI In [B400], Hardware (Not Kernel Mode), Input, No DLS, External
    Registry: OK
    Music Test Result:

  2. #2
    Check the date and time on c:\windows\system\foldtraj.scr and look if there's a file called sspred.val in c:\program files\distributed folding project\ (or wherever you installed it).
    Howard Feldman

  3. #3
    I already found out about the sspred.val. It exists in the program folder and I even tried copying it to the c:\windows\system folder as I was getting a specific error for that file.

    The date and time for Foldtraj.scr is May 31st, 2002 12:27:40PM for both created and modified time.

  4. #4
    Then it could be an unrelated problem. I suggest trying the command-line client - if this works without crashing, it is probably a video driver bug. Although I have not had any problems with nVidia drivers before so Im not sure how likely that is. Do you have any 'special' OpenGL drivers installed for your video card?
    Howard Feldman

  5. #5
    I have the 29.40 drivers running for the video card. Asus came out with their version of the drivers. I have not added any special openGL drivers. I unded up redoing my machine last night and am currently running a set to see if maybe something had unknowingly gotten screwed up that a full reinstall may fix.

  6. #6
    Seems to be fine. It has processed two whole sets without any crash or error, one overnight and one during the day without any interruption from me. I checked the stats from another computer and am not at home yet so I'll check when I get home to be absolutely sure. Maybe I'll get back up into 13th place again on my team. Maybe.

  7. #7
    Whatever it was, it is gone. Got the Screensaver on my home 98SE machine and I am in the process of adding the text client as a service to the machines on a WIn2000 network I set up. Soon, my rank should rise sharply.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •