Results 1 to 16 of 16

Thread: Maxwell count is wrong on MMs page - could be an issue with > versus >=

  1. #1
    Senior Member MarkRBright's Avatar
    Join Date
    Oct 2011
    Location
    West Yorkshire, UK
    Posts
    197

    Maxwell count is wrong on MMs page - could be an issue with > versus >=

    I think there is small issue with the count of Maxwells, though if I am right it might be worth checking if it applies to MiRBs and TeraMiRBs too
    I have a spreadsheet into which I post the daily stats from Free-DC for which I am very grateful thank you very much.
    The issue is with the mms page. In my case it states that I have 14 Maxwells, but my spreadsheet highlights those MMs where the count exceeds the number required for a Maxwell in the Free-DC data, and it is showing 15 which if I manually check appears to be correct.
    I have taken into account that you can't get a Maxwell for Maxwells (and similarly a MiRB for MiRBs and also for TeraMiRBs)
    My suspicion lies with my SubTrigggl value which is exactly what is required to get a Maxwell. All the others Maxwells that I have, have more than is needed. I don't know how long this has been there but my SubTriggl count has been changing of late.
    Apologies if I am being stupid, but I have checked my spreadsheet and created a new worksheet to double check, and at the end of the day the data on the mms page clearly demonstrates the problem. I think there is a > where there needs to be a >=, and it may well apply to MiRBs etc.
    Cheers
    Mark

    Edit - Or could this be a rounding thing? With my number clearly being an integer - 5, but the number required that it is comparing it with is actually 5.2 but showing as 5?
    Last edited by MarkRBright; 10-27-2020 at 06:32 AM.

  2. #2
    My impression was that this table stopped being updated when the green ticks appeared and the Mawell count was removed from a user's home page stats.

  3. #3
    Senior Member MarkRBright's Avatar
    Join Date
    Oct 2011
    Location
    West Yorkshire, UK
    Posts
    197
    Quote Originally Posted by PDW View Post
    My impression was that this table stopped being updated when the green ticks appeared and the Maxwell count was removed from a user's home page stats.
    I am talking about the excellent and newer MMs (Test) page which lists the numbers all together (Projects and Subproject MMs) as well as the number required of each to gain a Maxwell, MiRB or TeraMiRB.
    Both are being updated however and both currently show the same problem which I suspect most people will not see.

  4. #4
    I could be wrong but I think the new page is pulling the total from the same place that the single Maxwell page is getting it from.
    I have 32 ticks but only 30 on both pages, it has been wrong for quite some time, my recollection is it went wrong when the Maxwell listing was removed from the user's home page.

  5. #5
    Administrator Bok's Avatar
    Join Date
    Oct 2003
    Location
    Wake Forest, North Carolina, United States
    Posts
    22,336
    Blog Entries
    13
    I'm having to go back and try to remember how these work.

    Isn't it to get a maxwell you have to have >= highest score / 2 ?

    So let's take the Subtriggls, the highest score is 11 and you have 5.

    The issue may be that on your mm page it shows that 5 is needed for a maxwell but that's incorrect. I'll add a decimal place to that. Take a look in stats6 now ?

  6. #6
    Senior Member MarkRBright's Avatar
    Join Date
    Oct 2011
    Location
    West Yorkshire, UK
    Posts
    197
    Yes that appears to be it. Rather than include an unnecessary decimal point though (given that you can't actually get 5.5) it would be better and more accurate to just add a half them all or round them up rather than down whichever is easier. After all you would need 6 in the subtrigggls example. It would also save me some hassle in my spreadsheets though that is beside the point. Whatever you think works best Bok. Cheers

  7. #7
    Senior Member MarkRBright's Avatar
    Join Date
    Oct 2011
    Location
    West Yorkshire, UK
    Posts
    197
    You are probably aware of this Bok but subTeraBoks and subBoks seem to be missing from the stats 6 version of the page - just thought it worth throwing that in in case you ever copied stat6 to stats.
    FWIW I just rejigged the format of a column in my spreadsheet and it doesn't matter a jot to me whether its 5.5 or 6 now - though it would be better as 6 from a realism point of view.

  8. #8
    Administrator Bok's Avatar
    Join Date
    Oct 2003
    Location
    Wake Forest, North Carolina, United States
    Posts
    22,336
    Blog Entries
    13
    Quote Originally Posted by MarkRBright View Post
    You are probably aware of this Bok but subTeraBoks and subBoks seem to be missing from the stats 6 version of the page - just thought it worth throwing that in in case you ever copied stat6 to stats.
    FWIW I just rejigged the format of a column in my spreadsheet and it doesn't matter a jot to me whether its 5.5 or 6 now - though it would be better as 6 from a realism point of view.
    I changed it so it would be 6 in that case

    ceil(c.total/2) as num_maxwells

    I'll have a look at the other issue in a bit.

  9. #9
    Quote Originally Posted by Bok View Post
    I'm having to go back and try to remember how these work.

    Isn't it to get a maxwell you have to have >= highest score / 2 ?

    So let's take the Subtriggls, the highest score is 11 and you have 5.

    The issue may be that on your mm page it shows that 5 is needed for a maxwell but that's incorrect. I'll add a decimal place to that. Take a look in stats6 now ?
    You told me last year...

    My current algorithm is that you get it when score is >= floor(max/2).

    so if you have 5 and the max is 11. Is 5 >= 11/2 === is 5 >=5

  10. #10
    Senior Member MarkRBright's Avatar
    Join Date
    Oct 2011
    Location
    West Yorkshire, UK
    Posts
    197
    I am pretty sure that what PDW says is the way it used to work. I certainly used to have a Maxwell for SubTrigggls, though whoever is in the number one slot may have just gotten an additional one so I can't be sure.

  11. #11
    Administrator Bok's Avatar
    Join Date
    Oct 2003
    Location
    Wake Forest, North Carolina, United States
    Posts
    22,336
    Blog Entries
    13
    I'm open to change it to that if you guys want it to work that way

    Just let me know

  12. #12
    Senior Member MarkRBright's Avatar
    Join Date
    Oct 2011
    Location
    West Yorkshire, UK
    Posts
    197
    I would think a majority would go for rounding down over rounding up. I know I would, as I think (and PDW seems sure) it's how it worked before and of course it would restore my Maxwell count to what it was :-)

  13. #13
    Quote Originally Posted by PDW View Post
    You told me last year...

    My current algorithm is that you get it when score is >= floor(max/2).

    so if you have 5 and the max is 11. Is 5 >= 11/2 === is 5 >=5
    Having read more, I replied to your email to say...

    Okay, but I've only ever seen it described on various forums along these lines "remember you need to have at least half of the max to get the maxwell".

    That is from your forum by you.

    You didn't reply after to say you had changed it but it looks like you must be doing it one way to give the ticks and another way to get the Total value.
    I'd like it to be consistent so ticks = total please.
    Whether it is up or down is swings and roundabouts
    I have a few swings but still lots of roundabouts

  14. #14
    Senior Member MarkRBright's Avatar
    Join Date
    Oct 2011
    Location
    West Yorkshire, UK
    Posts
    197
    Quote Originally Posted by PDW View Post
    ... it looks like you must be doing it one way to give the ticks and another way to get the Total value.
    I'd like it to be consistent so ticks = total please.
    Whether it is up or down is swings and roundabouts
    Seconded

  15. #15
    Senior Member MarkRBright's Avatar
    Join Date
    Oct 2011
    Location
    West Yorkshire, UK
    Posts
    197
    I see what you did there Bok and it looks right to me. It's always better to avoid taking things away.

  16. #16
    Member
    Join Date
    May 2013
    Location
    Davis, California // Beni Mekkoud, Morocco
    Posts
    30
    It is probably too late for me to comment on this but I prefer "ceiling" rather than "floor." I liked the idea of 1/2, but in my way of thinking 5 is not good enough for 5.5 and thus 6 would be needed to achieve at least 1/2 of 11.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •