Results 1 to 33 of 33

Thread: top speed

  1. #1

    top speed

    what is your top speed in sieveing guys?
    mine is 404 kps on AMD XP +2000 (underclocked to +1800)

  2. #2
    I've had 417 kps on the low range with an Athlon 1.33 GHz

  3. #3
    Senior Member
    Join Date
    Jan 2003
    Location
    UK
    Posts
    479
    445 kps on the dual range with an XP 2100+.

  4. #4
    I love 67607
    Join Date
    Dec 2002
    Location
    Istanbul
    Posts
    752
    516 kps on regular range with XP 2400+

  5. #5
    Member
    Join Date
    Jan 2003
    Location
    Germany
    Posts
    36
    474 kps on dual range with a P4 2.6 GHz

  6. #6
    does any one have a dual amd mp 2600+ system? I wish i wanna know what those do. I can only guess but I'm guessing fast.

  7. #7
    Moderator ceselb's Avatar
    Join Date
    Jun 2002
    Location
    Linkoping, Sweden
    Posts
    224
    214 kps on a PIII700@800. That's my fastest box btw.

  8. #8
    I love 67607
    Join Date
    Dec 2002
    Location
    Istanbul
    Posts
    752
    Originally posted by rosebud
    474 kps on dual range with a P4 2.6 GHz
    Wow!

    All I can get at a P4 is one third of this.

    To be precise; 135 kps on regular range with a P4 1.4 Ghz and 150 kps on dual range with a P4 1.7 Ghz, which I am using for other projects. But, if there's a way to speed them up at sieve, I'd be happy to shift these two to sieve as well. BTW, my test results are for version 0.37, sse2 client. Other clients perform at least 20% worse.

    Which version of the client are you using? Or, may be it's due to some setting or a specific hardware component. So, could you please give some specific details as well?

    Thx.

  9. #9
    Member
    Join Date
    Jan 2003
    Location
    Germany
    Posts
    36
    Originally posted by Nuri

    Which version of the client are you using? Or, may be it's due to some setting or a specific hardware component. So, could you please give some specific details as well?
    I use the sse2 client v0.37, too, no special settings.
    I think the speed is due to the 800 MHz PSB (Processor System Bus, but don't ask me what that presicely is) and fast memory.

    On my another P4 (2.4Ghz) I can't get more than 260 kps.

    I'm sorry that I don't have a magic recipe to speed things up

  10. #10
    I love 67607
    Join Date
    Dec 2002
    Location
    Istanbul
    Posts
    752
    Thanks for the info. I'll look into those two components as well on my next upgrade.

  11. #11
    Moderator ceselb's Avatar
    Join Date
    Jun 2002
    Location
    Linkoping, Sweden
    Posts
    224
    157 kps on a PIV-1.5 with 400Mhz fsb and fast (rdram) memory.

  12. #12
    Member
    Join Date
    Oct 2002
    Location
    Austria
    Posts
    37
    267 kp/s on a PIV-Celeron 2000@2480 (124MHz FSB) with version 0.37 sse2 client
    367 kp/s on a PIII-Celeron 1300@1560 (120MHz FSB) with version 0.37 cmov client

    both dual range

    and the PIII needs only 150W electricity, the PIV needs 250W

  13. #13
    Sieve it, baby!
    Join Date
    Nov 2002
    Location
    Potsdam, Germany
    Posts
    959
    Just (shortly) tested my P4 (3 GHz, PSB800) with Dual Sieve range:

    ~ 2x 260 kp/s = a bit over 500 kp/s

    Really seems like it hugely depends on memory bandwidth when using a P4.

    Another observation:
    Using DualCheck range only, I score ~ 2x330 kp/s. So the speed decrease of Dual Sieve is almost neglegtible when compared to the much bigger n range.

  14. #14
    Junior Member
    Join Date
    Aug 2003
    Location
    France
    Posts
    24
    ceselb :157 kps on a PIV-1.5 with 400Mhz fsb and fast (rdram) memory.
    100 kp/s on a celeron 400 OC@411MHz
    more than 160kp/s on a celeron 700MHz (can't remember exactly, but faster than a p4 1.5MHz )
    concerning speed,sieving don't seems to take much care of L2 cache size that is really a problem with other factoring methods (like ppsiqs). Older celeronA may be relatively as fast as p3 or athlons (with sdram) and much faster than p4...

  15. #15
    Sieve it, baby!
    Join Date
    Nov 2002
    Location
    Potsdam, Germany
    Posts
    959
    Currently, my system runs at 2x275 kp/sec = 550 kp/sec.

    Older celeronA may be relatively as fast as p3 or athlons (with sdram) and much faster than p4...
    I guess you mean the non-A Celeron, don't you? The A-type already sports L2 cache and is comparable to the P3 considering speed/frequency.

  16. #16
    Junior Member
    Join Date
    Aug 2003
    Location
    France
    Posts
    24
    I guess you mean the non-A Celeron, don't you?
    in fact, I was not talking about oldest celerons that doesn't have cache but about the fact that Sob sieving speed is the same with 128,256 or 512kb L2 cache (and maybe with 64kb too)... Other sieving computations (as the sieving phase of ppsiqs factorization method) are many times slower with small cache mem because all the sieve has to fit in it...

    This is not the case with SoB and it is still fun to join the sieve even with old cpus!

    Best wishes.

    Philipppe.

  17. #17
    just for a laugh, but i think i win the speed competetion.

    a snipet from the SOB.dat file

    pmin=162026480078699 @ 488 kp/s
    pmin=162026490078767 @ 4294967104 kp/s
    pmin=162026500078823 @ 489 kp/s


    boy i only wish sieving went that fast.

    specs

    AMD 2100+ non OC
    256 mb pc2100

    kenny

  18. #18
    280 kp/s on a P4 2.6 (version .39 of the client)
    190 kp/s on a P4 1.6 (version .40 of the sse2 client)

  19. #19
    Sieve it, baby!
    Join Date
    Nov 2002
    Location
    Potsdam, Germany
    Posts
    959
    Originally posted by maniacken
    boy i only wish sieving went that fast.
    Well, when I started sieving (which was a couple of weeks after it went public), the best guys had like 10 kp/sec sieving speed. So I think increasing the performance by factor 50 within 1 year is nevertheless quite impressive, isn't it?

  20. #20
    I just downloaded the new client version .40 and it seems ot have given me a speed increase but i didn't expect it to so i don't remember what speed i had before. I'm quite certain it is faster now though. Things get faster all the time it seems. I'm getting almost 500 kp/s wiht an AMD 2000+

    The sp[eed it runs at seems ot be alot more consistant too. It gives the same steady speed constanly when not being used as opposed to varying slightly in either direction by about 5-10 kp/s.

  21. #21
    Senior Member
    Join Date
    Feb 2003
    Location
    Sweden
    Posts
    158
    I rewrote the timing routines in conjunction with the bsd port, so that may explain the more stable rate. It shouldn't be any faster though, so if it is then it's quite likely just an artifact of the new timing code.

  22. #22
    I tried reinstalling the old client and there is a definate 5% speed increase on my computer. At least thats what the programs report as the speed. Perhaps this is just a reporting differance. we'll see ho the completion stats come out in the end. I do expect them to be better because the computer is already ahead of where i expected it to be by this time today. I can't wait to install this version on my other machines after the new year.

  23. #23
    mine has gone up a little
    489 to 493 every little bit helps though


    kenny

  24. #24
    Junior Member
    Join Date
    Aug 2003
    Location
    France
    Posts
    24
    the same for me : 106 to 108 kps...

  25. #25
    Originally posted by mklasson
    I rewrote the timing routines in conjunction with the bsd port, so that may explain the more stable rate. It shouldn't be any faster though, so if it is then it's quite likely just an artifact of the new timing code.
    And the FreeBSD version rocks Sir Mikael

  26. #26
    Dungeon Master alpha's Avatar
    Join Date
    Mar 2002
    Location
    Norfolk, UK
    Posts
    1,700
    559kp/s on an XP2200+ overclocked to an XP2400+ equivalent (1.8GHz -> 1.95GHz).

  27. #27
    645kp/s on Amd Athlon Barton 2800+ @ 2187MHz

    Does Proth sieve run faster on linux boxes, and can anyone recommend a good linux distro for a linux newbie. How about SUSE 9 Personal or Pro? I have never done anything with linux but I would like to try it out.

  28. #28
    Forgotten Member
    Join Date
    Dec 2003
    Location
    US
    Posts
    64
    No, the linux client seems slightly slower. Check out this thread.

    http://www.free-dc.org/forum/showthr...&threadid=5202

    pixl

  29. #29
    Unholy Undead Death's Avatar
    Join Date
    Sep 2003
    Location
    Kyiv, Ukraine
    Posts
    907
    Blog Entries
    1

    no speed increase

    yesterday I've changed my computer from 864MHz Celeron to 1.7 Celeron.
    but I didn't notice any speed increase.
    avg was 180 k/s became 180 k/s
    what's happend?
    sse2 looks slightly faster then cmov
    and no optimization does 120 k/s
    what can I do?
    wbr, Me. Dead J. Dona \


  30. #30
    Moderator ceselb's Avatar
    Join Date
    Jun 2002
    Location
    Linkoping, Sweden
    Posts
    224
    That's a celeron II, based on the P4 architecture. It won't be any faster than that. (I've told you already).

    It will be better for PRP now though, maybe you should switch to the SoB client on that box instead.

  31. #31
    Unholy Undead Death's Avatar
    Join Date
    Sep 2003
    Location
    Kyiv, Ukraine
    Posts
    907
    Blog Entries
    1

    I can't believe =))

    I can't understand how doubled CPU frequency doesn't give any speed gain. =(

    And alas, I can't connect to sob.pns.net =( to recieve WUs.
    wbr, Me. Dead J. Dona \


  32. #32
    Moderator ceselb's Avatar
    Join Date
    Jun 2002
    Location
    Linkoping, Sweden
    Posts
    224
    Because the P4 really sucks at lots of things and truly rocks at a few others. With 2.5+ Ghz and fast memory the downsides aren't all that bad.

    (Don't get me wrong, I like the P4)

  33. #33
    Sieve it, baby!
    Join Date
    Nov 2002
    Location
    Potsdam, Germany
    Posts
    959
    Plus, the Celeron counterpart of the P4 is really slow compared to the P4...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •